Most of the time, I feel like my style is straightforward. I try to be simple, but I have been known to veer to the dandy side with certain details. This DIY is going to be one of them. I grew up in Kansas and remember wearing lace up Justin Ropers about 20 years before UO carried the awkward knock-offs. The Justins were certainly more of a statement than my regular ropers, but I liked them... Especially when really worn in. I wore holes in them, had them resoled and they just got better.
Jump to present day and I'm wearing a pair of Red Wing Brogue Rangers. Somewhat fancy with the brogue details, but just the right amount. Then I'm goofing around on the internet and see a pair from Red Wing Amsterdam's blog and knew I had to push it a little further. If you're daring, maybe you'll want to make them too. I'm working with black boots, added brown laces and will use brown leather for the fringe. It's a subtle contrast, but won't jump out too much. Start with a small scrap of material, you'll need only a 3x5inch piece to cut both. I even made you a download-able template. These are sized for a 9 boot, so you might need to modify the size for a larger or smaller boot.
You'll need a sharp knife, cutting surface, an awl for tracing and a hole punch. Print the template out, and cut the outer shape. You don't need to cut the details, instead just trace and mark them into the leather with the awl. Once the shapes are traced onto leather, cut the details out with a sharp knife, then mark your holes and other cuts with the awl. Lace holes are punched with a #6 tube. You can punch relief holes in the lace slits if you have a really small punch, but they're not necessary.
Please note that W&F DIYs are for personal projects only and no rights granted for commercial use.